Tag Archives: line array box

Protect a car to defend rusty is a key

Web Design And Seo For www.china-webdesign.com
power pro audio – China Manufacturer
Thank you for inquiry my power pro audio, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/key-power-pro-audio-17/

Watch out for small scar car paint surface of small place to usually appear rust eclipse, in addition to familiar collision, scoring, the tire starts to play while going a car of the stone piece dozen is in painting noodles, will also make to paint noodles to appear one peeling off a little bit small
, Time is getting longer and then will produce a small rust spot.But these small scar because mostly in the unattractive place, easily be neglected.Therefore, want to periodically check bodywork at ordinary times, launch passenger compartment cover and carriage on all sides, once the detection will arrive a professional beauty store to carry on a processing in time.Frequently check to easily accumulate water place degree of humidity vehicle to drive on the way, it matter that is unavoidably to meet rain snow weather or pass by mire to accumulate water road noodles, the carriage bottom waits places, such as some crevices and car hinterland plank…etc. to all easily store dirty mire, don\\ t be in time carry on cleaning such as the car owner, this will let the moisture can hide.Therefore, for power pro audio the places like movable part,etc of the bottom side Cape, car door keyhole and wiper of exterior, car door and luggage inside the Gu, usually carry on a check, want to keep a car door and each department of carriage drain at the same time of unimpeded, overaly the degree of humidity of thing inside the check car, for example carpet etc., prevent°from a floor parts rusty.

Posted in Uncategorized | Tagged , , | Comments Off

Car Audio conversion: the advantages and disadvantages of CD MD and MP3

Web Design And Seo For www.china-webdesign.com
outdoorspeaker – China Manufacturer
Thank you for inquiry my outdoorspeaker, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/garden-speaker/

Car audio to today, has reached the era of scientific and technological competition, the application of new scientific and technological means, the operation of the sound is more simple, functional maturing audio to listen to effect significant improvement.
Here is to compare the form of music player.
  
    MD CD machine

    Why choose MINIDISC?

    MD is a digital recording format. MD enjoy the cassette recording, you can self-preparation of personal music special. In addition, it can repeat recording for more than a million times, at the same time, not affect the quality of each recording. MD is particularly suitable for those who often need recording. MD of digital sound can be compared with CD quality. And real-time search song, and digital editing features recording technology onto another peak.

    The characteristics and benefits of the MD

    Permanent recording quality characteristics: the MD playing pickup part have any contact with the surface of the disc will not MD, MD disc surface is not susceptible to loss. Benefits: the number of times of recording and re-recording, the MD can provide high-quality digital recording effect.

    Shockproof memory features: electronic shock memory function, can maintain the digital music data. Memory function up to 10 seconds or 40 seconds (according to model), even if the body can not pick up the signal due to vibration, the music is still stable playback. Benefits: MD can guarantee a steady stream of music playback. Good to use this feature results in the car.

    Digital CD to MD recording features: can edit all my favorite songs on an MD disc can enjoy digital sound quality. Advantages: no need to carry more than one CD disc out, need only carry a tiny MD disc enough.

    Professional editing features: MD has diversified editing functions, including mobile, portfolio, delete, divide the disc name and track editing. The benefits: you can be arbitrary amendment or make their favorite audio clips. In addition. You can easily make a special mix.

    High-quality digital recording features: MD, recorded music, conferences, classroom records, live music, an ideal choice. MD can record 74 minutes or more or 148 minutes of stereo digital recording single-channel recording. Benefits: can be used for recording or multiple repeat record any cassette tape recording. There is no damage to the recording sound quality, is a slim and durable format. Easy to operate playback and delete functions.

    MDLP (Extended Play) This function uses the Suo Nite some compression technology can play ordinary one up to five hours the MD with the home equipped with jukebox, featuring the MD Extended Play own featuring the beloved music. MDX-M690, MDX-CA680X this feature. MDX-C800REC and recording function.

    MP3 automotive multimedia CD player

    MP3 music is the most popular music format, compared with a normal music CD, it not only can be downloaded via the Internet to obtain different parts of the world\\ s music, and then the preparation and burn one of their own music CD, no time and geographical boundaries, but also can keep the original sound. In simple terms, the MP3 technology is a general music format encoding, transmission, compressed to a smaller format without compromising the original sound technology. In addition, because of the small MP3 music format, a CD can be burned over 100 songs. What is MP3? MP3, full name of MPEG-1AUDIOLAYER3 (abbreviation of the third layer), the computer file format is a compressed digital computer technology, the sound into digital computer files used to store music. Compressed MP3 files, to store one minute of high-quality music only 1MB of memory capacity, lower than the average storage format 10 times the capacity of a 650MB CD can store 130 songs, file storage space occupied by the greatly reduced. The emergence of the MP3 on a CD to burn more songs, to dispense with the trouble of changing discs!

    How to enjoy MP3? Downloaded from the Internet: The Internet is an international information station, you can search for country songs from the network, downloading MP3 music from different countries, quick and easy! * First, access the Internet, pick your favorite MP3 music page to download your favorite songs. * And then use a CD burner, MP3 music download burn them to CD-ROMs. * Has a capacity up to 650MB of MP3 discs, you can immediately enjoy the sounds of more than one hundred songs. Admission: * First, collect your favorite music CD, from selection of favorite songs from the CD. * MP3 Maker, the selection of music compressed into MP3 music files, and then all the files recorded into the CD-RW. * Has a capacity of up to 650MB of MP3 discs, you can be the perfect choice of music space.

    Volume of an MP3 file? MP3 file size and bit rate (bitrate on) and music playback time. Generally four minutes of music recording, recording speed to 128kbps probably accounts will be 5MB capacity of the disc, a 640MB CD-R/RW can store 130 songs. What is the bit ratio (bitrate on)? This is the term used voice compression, on behalf of every second of sound data the average consumption bit quantity, unit of measure in kbps (1000 bits per second). Selection in the production of MP3 bit larger the ratio, the better sound quality, the most common bit ratio of 128kbps. CDX-V7800X, CDX-MP30, CDX-MP50 have this feature.

    Advantages and disadvantages:

    The advantage of the CD is caused by fine, good reproduction is better used as a fever. The drawback is that each record a short time recording tracks. The advantages of the MD can be repeated recording, damping, and can be compressed recording. The drawback is that the sound quality than CD is some hard, although it has been greatly improved, but listen carefully and CD difference. The advantage of the MP3 is a wide source of music tracks can be edited in different ways, compression, multi-track. The disadvantage is that due to compression caused by the loss of some signal, so the range compared with the CD will be narrower. Music lovers can be according to their preferences and listening features to select what kind of sources

Posted in Uncategorized | Tagged , , | Comments Off

car audio installation Raiders (on)

Web Design And Seo For www.china-webdesign.com
line array box – China Manufacturer
Thank you for inquiry my line array box, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/key-line-array-speaker-box-13/

Drivers friends probably encountered traffic jams, here anxious as ants on a hot pan, but the traffic there motionless. At this time, why do not you listen to music? So that the long wait for a casual good time. So what? Quickly to install car audio now! However, before you decide to install a car stereo, it is best to first understand some of the relevant knowledge, which you certainly are useful.

Purchase of articles

Friends of the driver, buy a quality car audio there is very difficult. Currently, the car audio market, attractive profits, many roadside shops are mostly without professional installation technician training, installation of car audio often a variety of failures, to traffic safety hidden trouble. So, how to choose rest assured that the installation of car audio and scientifically, effectively maintain it? Recently, the reporter visited a number of car audio shop and the industry, they remind you start from the three chapters, you will easily have a Heart of car audio.

Face of the market an array of various brands of sound, very easy to know what to do, how to choose sound there are some basic rules to follow.

1 according to their taste and affordability may be

This is a clear understanding of their specific expenditure is the cost, because a good sound natural to have a good price. In the high-end luxury cars generally have more advanced professional audio, in which European and American products better, the sound quality, sound more professional than the Japanese products. But now some well-known Japanese brand car audio brands have also introduced some of the fever to compete with Europe and America. Although performance is good, but the price is really amazing, definitely the real materials, to achieve its target value listed on the nameplate and long-term sustainable use. Mid-range audio equipment such as the selection is none other than non-Japanese product, its brand in the professional car audio equipment accounted for 2 / 3. The ratio of price and performance value for money, and from the functional completeness of the shape and appearance, decor and sophisticated technology, etc., but also in Europe and America can not compete with the products.

(2) to recognize whether it is really the brand

Now on the market for vehicle audio equipment businesses particularly, in order to avoid buy a fake and shoddy products, the best depends on whether the business owns the brands of audio equipment factory authorized designated agent license, whether the service capacity and quality three bags of commitment measures. Another excellent product, we can not guarantee that the operation will not be a problem. To address the conservation and car audio troubleshooting problems in the purchase of sound mind when the selected audio brand in the local service professional certified repair stations. Only with perfect audio brand of service in order to ensure the car\\ s sound in the event of failure to be professional, convenient service.

3 to consider the ability of the host amplifier

Try to use the power of the amplifier is greater than the speaker instructions. In the long-term use because of the small high-power amplifier output, easy to burn, can lead to poor sound quality, distortion and other failures. For example: the sum of all the speakers indicated power of 100 watts, the amplifier power to 100-l50 watts, in order to have a good match.

4 To understand the speaker\\ s performance

High-grade will not be much difference between the performance of the host, speaker of the difference is amazing. A speaker at every turn marked with a few hundred watts of power, many insiders are confused, many speakers you just use it to mark the 1 / 10 the power to try a few minutes, I am afraid will be exposed to a white smoke.

5 To listen to sound, sound effects

Listen, it is best to find several dishes representative of the songs, music, percussion and other discs, the pure sound of various degree of identification, and then determine whether to buy.

6 keep good products, invoices, proof of maintenance

In order to avoid unnecessary disputes, and protect their interests, Take good care of your product invoice, proof of maintenance.

Posted in Uncategorized | Tagged , , | Comments Off

home audio layout description

Web Design And Seo For www.china-webdesign.com

line array box – China Manufacturer
Thank you for inquiry my line array box, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/key-line-array-speaker-box-13/

Introduce home audio distribution

Introduction

Mainly two-channel home stereo Hi-Fi system and multi-channel AV system, the former is what we often say 2.0 or 2.0 powered speakers Passive speakers and amplifier combination; the latter is the home theater sound system, and is generally 5.1 channel, 7.1 channel speaker in recent years, however, is endless, which to some extent from the 7.1-channel sound card appear. And have appeared in the 4.1 channel.

Home audio sound effects related to many factors, such as room size, room shape, speaker of the display layout and more. A sound system in the same case, we can not change the size and shape of the room, only through the audio layout to improve the acoustics. In order to get better sound, home audio layout is very important.

Two-channel sound system

2.0 Speakers
For 2.0 speaker is – \"triangle\" pendulum method has been very mature.

First of all, between the two speakers to maintain a certain distance. Typically, this value is probably between the 1m-2m.

The speaker and the wall distance is best at least 30cm. This is because many speakers in the box with holes down the back speakers at work when it is discharged through the air. Especially high-power output, if too close to the wall, the impact of air to the rear wall easily, this will cause the bass muddy.

To face the speaker towards the listener. This means that it should form a certain angle with the desktop, rather than parallel to the relationship. As for the distance between the speaker and you, too practical to consider the practical issues.

2.1 Speakers

That pursuit is definitely Hi-Fi 2.0 speakers, which is mentioned before the two-channel Hi-F system. At present, there are a lot of on the market, or a common or ordinary consumers use 2.1 speakers. The placing of these speakers also pay attention to the requirements of 2.0 speakers but no less complex.

In general, you can put it on the computer desk below the subwoofer, and two satellite speakers on the computer desk just need the top left and right enough.

Multichannel audio systems

4.1 Speakers

In order to bring better sound field surround effects, there have been 4.1-channel speaker. Its basic composition is evolved from the 2.1, but the name change, the four satellite speakers are divided into front, rear two. In place, it s two front speakers and subwoofer with 2.1 speakers placed no difference. The two rear speakers are generally required on your left and right rear two positions, and the best axis aligned with you. Height of the best with your ears at the same horizontal plane. If not, then ask them to both the vertical axis of the speaker plane can be the best point to your ears, and most do not exceed the distance of 1.5m.

5.1 Speakers
With the increasing popularity of home theater, 5.1 channel and 7.1 channel speaker s attention is also increasing. But certainly not a good thing to have good sound effects, compared to the previous, the 5.1-channel speaker placed much more complex.

■ placing the subwoofer

Because the human ear is not sensitive to the direction for the bass, so it can be placed in the corner. But this time, we must note two points:

A subwoofer is definitely not easy to form on the resonance of the object. If so, when the subwoofer work, the object also followed shock, a great impact on quality;

Second, the subwoofer does not matter must be close to the rear wall. This is because many of the subwoofer is designed after the inverter. The phase inversion towards the hole, if not a certain distance, not to play bass on a. Therefore, at least some distance away from the wall.

■ front speakers

It is best with ear angle of 45 degrees -60 degrees, where the distance from the speaker about the listener s position, that monitors the distance from the listener decide. In general, the front speakers can be placed in parallel for the listener or the same place as the 2.0 system, but no matter how placed, highly to be as identical as possible.

■ Center Speaker

The center speaker is only one principle – must be put in place in front, left and right speaker is the perpendicular bisector line. Although it does not matter from front to back, but still good to try to moderate.

■ Surround speakers

And the front speakers should be placed face to face or with the human ear into a 60 degree angle display, and it is best to hang in the rear and above the head 60 cm -90 cm.

In short, a good 5.1 positioning system, positioning should be clear, there is no fault. Like a bullet across the sky, there should be a very complete change in the position of feeling, without feeling or feeling is not clear, you need to adjust your speaker location. The voice dialogue should be sent from home, feeling the speaker in front of you. Low frequency, the 5.1 system the emphasis is on shock, large dynamic scenes should have a good contrast effect. The more high-quality 5.1 system, you should be bass eloquent and magnificent.

7.1 Speakers

For the 7.1 speakers, the more it is based on the 5.1-channel has been further improved, an increase of two surround speakers, it reached number four, namely: front left, right, left rear, right Surround. Therefore, it is also based on the location of placing a 5.1-channel speaker changes.

For the subwoofer and the front, center speaker, 7.1 channel system with 5.1-channel system is almost the same.

Four surround speakers placed, the principle is the same, that is, the surround speakers to the formation of the human ear 60 degree angle, and preferably higher than when you are sitting at the head of more than 60-90cm.

Where change is that the surround speakers placed in your left front, left rear, right front, right side after the position to be placed face to face manner, that is, four speakers are facing you. Also, ensure that both the left and right speakers, two speakers were in the same straight line.

There is, left, right, two surround speakers, and you should be at the computer screen with vertical straight line, and with a pair of rear surround speakers at a same plane, were hung on both sides of the wall (you can also on the bracket).

Posted in Uncategorized | Tagged , , | Comments Off

subwoofer sweep aside the myth of the five modified

Spread in the car audio industry myth about the subwoofer sound a lot, and some really bizarre sounds extreme, the following will

introduce several alert readers to look at:

1. “Rushed and you want music that sounds interesting, installation subwoofer on the right”: This argument does not pay attention

for the quality, accuracy of sound field, but only the pursuit of sound pressure to stimulate the people who really feasible, because

you As long as the low-pass subwoofer crossover point and subwoofer work pulled to the frequency domain overlap, a substantial

increase in the amount of bass you can feel. However, this greatly inflated the bass is definitely not the right voice, it sounds

absolutely will not only momentum but nice.

2. “Subspeaker-25/”>woofer speaker hole size consistency as long as any subwoofer can be installed”: each of the mechanical characteristics of the

subwoofer is not the same, assuming that the proposed speakers on a speaker volume is 20 liters, another is 40 liters, the results of

these two speakers are installed in the same style of the speaker, the sound effect you think they will be the same? Real professional

practice, or have to use the original test data sets of speakers formula, tailored to match the volume of the speakers, the subwoofer

to get the best results.

3. “Two different brands, models installed on the same subwoofer speaker can also use”: I do not know this because the stock

speakers or stereo shop for other design considerations only occur, basically as long as the different brand, model subwoofer, its

mechanical properties are different, so if a speaker fast movement, the other a horn like a slow and in the jump, so the subwoofer

does not like the introduction of a ghost fighting as hard to hear pole? Thus, two different brands and models of speakers installed on

the same speakers, the vast majority of cases are not feasible design.

4. “Because the subwoofer installed in the car trunk, so the sound is coming from the back”: If you encounter a car audio shop boss

told you so, you can ask him: Why not put on a home stereo shop sounds do not sound like from behind? Basically, as long as the

subwoofer system is installed properly, phase, crossover, proper adjustment of the amount of sense, you hear the low sound field in

front of the foot should be in the driver s seat position, and with the bass to get a good convergence.

5. “Convertible two-seater sports car subwoofer system installation location is in the luggage compartment”: We all know the general

car install subwoofer system is the ideal location after the luggage compartment, but if you encounter such as Mercedes-Benz SLK

two-seat convertible cars, and even Porsche, Ferrari, so we have to change the rear-engine sports car subwoofer, that method may

not Siban Ban mounted subwoofer to forcibly stuffed into the trunk slightly! Imagine the car s luggage compartment and passenger

compartment has a thick layer of sheet metal between the separate subwoofer mounted in the luggage compartment, how could

pass into the passenger Boeing matter. So experience this car subwoofer system to convert the special case of the method is still to

be a special shape of the speaker, deputy seat installed in front of the pedal position is!

Tagged , , | Leave a comment

car audio subwoofer construction use and selection

speaker-box-28/”>

The construction of the subwoofer:

Subwoofer and refined using high-strength aluminum frames, gold-plated speaker terminals to enhance overall performance, with ultra

-superior conductivity and prevent oxidation corrosion, special bulletproof strengthen the tympanic membrane, epoxy coated pressing

cone, double damper ventilation and longer pole, extending yoke and large strontium magnet alloys. Subwoofer applications more size

8-inch, 10 inch, 12 inch, 15 inch, 18 inch. Structure

Subwoofer use:

Form useful for design box, drum, also use the trunk as an enclosed vehicle, designed to reproduce the rich bass and large sound

pressure level (SPL). However, not everyone has a car speaker or placed where there is enough money to custom speakers, the

United States KICKER freeair enthusiast uniquely designed subwoofer, the speakers do not need to be able to produce a strong bass

sound effects, easy to install cost less, if you also use a KICKER amplifier, coupled with an active crossover module can produce a

sound feeling. Now KICKER has produced a type of square SOLO-BARIC L7 subwoofer, the subwoofer features the largest full use of

cabinet space, so that the sound pressure increase.

The choice of subwoofer

If you choose to listen to the sound quality of the sound system, select the sealed subwoofer, which is characterized by sound easy

to control, better sound quality, but the efficiency is relatively low. Optional KICKER SOLO-BARIC subwoofer, sound real and leave. If

you choose to listen to sound pressure (SPL) “disco, rock and roll” so-called “blow up”, choose a wind hole of the box, it is

characterized by large volume, make a sound pressure for the game, more efficient, but the low speaker volume size requirements

more stringent, duct diameter and length also have certain requirements. Optional United States AUDIOBAHN subwoofer, the sound

powerful.

Do not buy low-grade, low sound, especially low-active speakers, active subwoofer uses many processed into plastic cylindrical box,

with a simple circuit as an amplifier, and some slightly used pseudo devices will have a high failure rate and overheating the fire. This

low sound speaker of the divergence cone Shoubu Zhu control well, as rural use bellows issued a “call, call”. This low-midrange

speakers are generally present. The real bass sound is very “real” one, one, very full, and does not contain elements midrange.

Regardless of the subwoofer, it is best to find professionals with the design of the power amplifier, according to the current size,

select the insurance and the power cord through the thickness, safety is paramount. Given in accordance with the subwoofer s

cabinet volume data, calculated according to the shape of space inside the box the size of the production process is also very

important, the box can not leak, if there is a small hole, the efficiency loss will be 10 %, and only professional design and construction

to achieve the best results.

Tagged , , | Leave a comment

sound effects for the host on the evaluation of Japan is Clarion D2

Clarion Japan has been in China, Japan, the other two brands as Pioneer or Alpine in the country so famous. The reason seems to

Clarion brand manufacturers or suppliers may be more emphasis on the domestic cost of production, but do not start focusing on the

booming domestic car audio market. However, enthusiasts will certainly not forget the D2 name, because it can be said in some sense,

represents Clarion s image in the eyes of people, and its pure sound design, has also been very critical of those consumers of all ages.

All in all, I would be a Clarion fans, from the early 1990s, came into contact with its products, the beginning I always thought they do

not pay attention to after-market car audio, most of the energy on the areas with the depot facilities. Can be made to the late

1990s, the first exposure to it to sound a clear orientation DRX9255EXL host, the impression that it began to change, then the sound

quality of this host can be described as unique, special deep impression until now, but unfortunately This host is a Western version,

played it at home can be one of the few owners really! Until 2000, the Asian market s first car audio console with HDCD decoding HX

-D1, the impression it have a better understanding, because the HX-D1 sound quality than the other models is more outstanding in

the past, when the true There is a refreshing feeling. Now the market is more popular high-end Clarion another new model HX-D2,

can be said that the previous generation flagship host DRX9255EXL and HX-D1 alternative models, although it does not fashionable

MP3, WMA and HDCD playback, but the HX -D2 or the appearance of both the sound quality, are that it s in the car audio field has a

step forward.

The first design concept reflects the sound
A good equipment, starting with the design concept began, every little detail can not be ignored, it was said, every detail it

represents a sound symbol, if you want to be able to show up all the symbols, you have to pay attention to each the details.

Although the size of a standard D2 1DIN size, but, though small, can be perfectly formed. The first is the host of its copper shell, to

see that this is a boy, the industry s first 96kHz sampling digital sound processing; Burr Brown 24Bit D / A converter, 4-way electronic

crossover, 5-band parametric equalizer, 8-channel the RCA up to 4V output, digital time delay function, so that sound quality be

enhanced further, independent separate DC / DC converters to ensure stability of supply, CeNET network control, optical input /

output, vacuum fluorescent display, external simply set the amplifier output RCA low-level signals, etc., make it a lot of fans pay

homage to the products.

Copper used in the framework of D2 seems to be the host for all brands of high-end products, patents, copper shell can disrupt signals

to maximize inhibition of stray current, less susceptible to outside interference, to inhibit the effect of quality degradation, so that the

host work in a more stable state. Detail is also reflected in the output signal line, D2 line with a silver-plated SK: 6N copper output line

for RCA, 6N purity is, N is the 9 English narrow, that is, 99.9999% purity copper wire, all RCA output high-performance copper cable

used in all of this to ensure that the audio signal output to the amplifier by the smallest losses. Meanwhile, the internal circuit board

with a four-epoxy circuit board, with the power of this technology will separate the ground at different levels, to reduce the role of

impedance ground and power supply to stabilize the drive circuit, a great improvement on the quality help.

Ensure high quality sound on the details of the display also fell, D2 of the display also features auto-off feature when playing a CD or

other audio, the display circuit automatically shut down to avoid damage to the electron pulse noise, the sound quality. Independent

external power supply DC / DC converter, is this another highlight of the host, the host completely separate power supply and to

avoid interference between high voltage power supply problem, keep a good supply of pure power, so that the host job In the more

stable state, and seeks to achieve the noise completely ruled out.
Many of the world s first voice and rich details
It is worth mentioning that the application in the industry on the world s first D2 96kHz sampling digital signal processing, high-rate

sampling, the music can get more detail, just as the camera s high resolution, so that a clearer picture of the details of the outline. We

all know that regular CD sampling frequency of 44.1kHz, and the frequency of the signal D2 read his twice, that will not miss any

detail. There is a high sampling rate is high-frequency extension of the benefits will be higher, the CD s sampling frequency to 44.1kHz,

because the human ear listening range of 20kHz, so more than 20kHz UHF signal was cut off filter . However, this process will result in

clipping phase distortion, destruction of high-frequency signal fidelity; but was cut off on the high-frequency harmonic components

but also on the depth and charm to keep the sound of great significance. In order to reproduce the original audio signal the depth

and charm. HX-D2 s D / A converter sampling at 96kHz on decoding, for the first time in the car audio system to achieve a theoretical

maximum of up to 48kHz high-frequency regeneration, can be reproduced on the CD recording of various musical instruments in the

subtle charm, carefully D2 will find listening to the high frequency part of the details of the special and more.

D2 over-sampling the audio signal is encoded into a digital signal, word length is 24bit, the 16bit word length than regular CD length by

a third. Adjust the volume of high-tech technology also used crystal, the use of electronic volume IC Burr Brown United States, to

achieve a volume increase or decrease the interval to reach the world s first 0.5dB steps. By setting, users can choose 0.5dB or 1dB

accuracy. Most of the market compared to the control precision of the host, this technology has been slightly ahead.

In addition, it is 0.7 cm interval of time delay control function is considered to be of similar technology in the world s most

sophisticated, using this feature, you can for 8-channel sound system to set each speaker, no matter what the listener is located a

seat, you can achieve the best sound. 5-band parametric equalizer to the audio signal is divided into five major bands, the user can

choose according to their needs need to adjust the band, but felt it was too small number of frequency bands, can not meet the

needs of most customers, compared with Other high-end models like the Pioneer P90, Alpine H900 or 31-band equalizer trivial.

As a replacement for D1, will not let fans disappointed.
Powerful and complex, users challenge
Generally speaking, high-end positioning of the D2 is a very particular about the details of the models, especially in the area as a further

improvement of sound quality was received good results, whether it is the technology used or the actual results are favorable. On the

whole tone, in addition to the details of exaggerated feeling, which is high-quality-level system requirements, but also that its speed

too slow, and Pioneer P90 tough sense of speed compared to a completely different sense of style, is called: radish vegetables; all

have love, this is left to further business enthusiasts do.

D2 is definitely a recommended high-end host, while the use of D2 players must have extensive experience with the equipment. It is

rich with good physical function, can play through the performance of the users, showing the entire system is definitely the

opportunity for a higher level of sound performance. If those features are used to playing a simple host of players who want to take

full advantage of D2 of these complex functions, this is the greatest challenge.

Tagged , , | Leave a comment

Mondeo features to create winning interpretation of the original car audio upgrade

Mondeo, Ford of Europe s highest-tech history, the most sophisticated technology the new flagship model. More spacious body, more

luxurious and elegant appearance for Ford of Europe product line sets a new standard, called the perfect combination of technology

and art representatives. This acclaimed one of the car at home and abroad, adding praise session in the car audio car audio is not

absolutely the Munster clashes exactly what will spark it? Below hear me slowly come.
Sources as its literal meaning, is as a source of vehicle sound system, the choice of the host must not be vague. Carefully selected,

this sets the tone Mondeo finalize the king to have a generation machine, known as second generation Pioneer ODR. ODR

(OpticalDigitalReference) is a kind of optical digital signal transmission technology, first used in the home audio field, and the application

of this technology on the host in the car, casting a lot of classics.
The top one-third of a Munster MA654010 frequency component speaker sound field as part of the whole front of the car, 86dB high

sensitivity, 90W of real power, but look at the top of this data has seen extraordinary speaker sets. In order to promote this

MA654010 set to play trumpet and let the best results, specifically the use of two technicians in Munster AB4.85.10 four amplifier, so

generous with equipment not uncommon, in order to allow the equipment to get the best effects such a move is understandable,

but to see the configuration list or makes a kind of inexplicable “Routong” feeling.
Since the front sound field has been so to the force, after the sound field, how dull it would be willing to? Open the trunk will see the

12-inch bass Munster SW.12 installed in the middle, around the bass with a string of light blue LED lights as decoration, a kind of light

shining across the woofer misty fog-like flowers feeling. The latest new 2011 series SW.12 FIVE bass Articles have also been published

in its evaluation. In addition to its weight than the same type of thin light subwoofer, the sound of its unique German bass is quite

distinctive. Tough bass than perhaps known to the American sound of bass, but its fine control and the speaker of the stroke also

makes it fascinating.
A column by re-mold, will treble to tenor MA654010 install them, install the door in position on the bass, which is basically the first

sound field speaker installation method, do not overlook the A-pillar of the mold, the more simple and more technician can see the

hand, which is Dickson s technicians tell us this truth with examples. Speaking of technology, the I must mention the bass and the

amplifier s rear display. In addition to promoting the former speaker of the sound field MA654010 set two AB4.85.10 four amplifiers,

there is a dedicated bass amplifier D1.1000.1 promote SW.12 single amplifier. Amplifier was placed in a triangle of three, stood in the

middle of a bottle of well-known amplifier wine, Zhongxinggongyue like its surrounded, the owner of this car must also know how to

enjoy a person ah.
Summary: It is understood that the Mondeo car, has been involved in the latest James Bond film set 007 car selection. Outstanding

reputation and wherever it is the focus of attention. Alone car is already so attention to Munster with the sound system consisting of

equipment, even more so this Mondeo under the original light to add another light. Just look at the list of already configured so I have

got into the car audio system to experience the impulse from the shackles of helplessness so that I can only hope the map sigh.

Tagged , , | Leave a comment

fever started on wire

A good hi-fi equipment, necessary to configure the high wire, while the choice of what grade of wire, wire production materials and

production processes of their overall quality of a range of issues have to be linked with the grade of equipment itself. A sound use of

advanced low-cost tree and use an ordinary wire line obtained also sound difference is not large, and a high-end audio in the use of
power speaker
advanced wire and use an ordinary wire obtained when the replay but there is a clear quality the difference. This difference was not

significant and clear differences between the different results is the quality of the audio equipment itself is determined. But from

another perspective, if you want just by virtue of a few lines to make advanced audio replay of low-end audio equipment, the effect is
powered speaker
improved obviously unrealistic; and in a reasonable mix of high-grade equipment, neglected wire configuration will directly limit the full

potential of audio equipment, so that playback sound quality, resolution and other affected to some degree. Therefore, a proper

understanding of the wire in the audio system in place, it is necessary.

On the surface, good and bad wire in the wire to the DC signal through state resistance values ​​are very small, what did not seem a big
high power speaker
difference. In fact, this is a simple mistake. As the replay of the audio equipment is a different signal frequency alternating signal,

rather than constant DC signal, so the audio signal in the transmission, the transmission of accurate and good wire, transmission

frequency range, the performance of real, rich layers; The relatively poor signal transmitted by the wire will change with the frequency

change, the signal distortion due to band program also varies, both the difference between wire time will be relatively obvious. Hi-fi

cables can basically be divided; signal line, speaker wire (speaker wire), power cord three categories.

Signal line fever

Signal line is used to send from the source (source) audio signal generated by the wire. It includes coaxial signal line (RCA) (AV signal

cable), digital signal lines, when the cable signal line, balancing the signal line.

Coaxial signal line is the most popular standard signal lines, are its two RCA coaxial plug (commonly known as lotus plug), can be sold on

the current market standard turntables, CD players, VCD player, DVD player, LD machine, deck, tuner, LP player, MD, HI-FI audio

equipment and fever amplifier, AV effects and other audio processing / amplification equipment connection, this cable is widely used,

an unbalanced transmission type, has a certain anti-dry capability.

Digital signal line is a coaxial signal line, it looks the same coaxial signal line, and each string to use. And coaxial signal line is different is

that it s faster transmission rate, transmission frequency bandwidth (in the video range), anti-interference ability. The main purpose of

digital signal lines in high-end equipment is used to connect a CD with the turntable and D / A converter (D / A converter) to send a

single digital signal, and DVD digital output to the AV amplifier D / A converter signal transmission.

Optical fiber (cable) and digital signal line signal line the same effect, but it is transmitted from the CD transport / DVD player digital

optical signal. Because digital signals carried on the CD turntable in electrical / optical conversion into optical signals in optical fiber

transmission, and because the fiber-optic signal lines in the optical signal transmitted from outside the impact of electromagnetic

waves, and optical transmission brings them Floating between the signals, there is no common ground, common ground to avoid

interference, so the fiber optic signal lines of anti-interference ability is stronger than the digital signal lines. Optical fiber signal line plug

itself off from the optical fiber made of fear, the volume should be avoided in the use of flexion and vibration.

Tagged , , | Leave a comment

new line of car audio cables if you want to burn

Often with pot enthusiasts on the topic to the new line, the answer is yes, in practice, the new line is to burn like a new car to run a

major general, in a moving car can be gradually adapted by a variety of working conditions, of course, The running-in process is

gradual, car people know, the life of the car run-in period of great influence, future cars and good run-in period is also open to a great
outdoor garden speaker
relationship. Although the car is not like a car stereo wire the same mechanical structure, but the truth was burning and vehicle line

running exactly the same. The reason why car audio wire and other wire of different, largely related to its internal structure, core

materials, processing technology, the arrangement of the crystal as well as signal flow are very demanding. Individuals that, in normal
horn speaker
use, for a variety of high and low frequency and amplitude of different sizes, a broadband spectrum of music signal, gradually the

crystal structure of the molecular wire slowly straighten out the form neatly arranged, the largest extent by the resistance slow the

music signal to reduce signal loss, so that the signal transmission as the perfect circuit to the next level, this process is like running in
power speaker
front of that car must be slowly, gradually, the effect will be better , all the haste of the crash probably not a good way. Moreover,

the long line through the burning process, seriously appreciate the wire quality, flavor changes, which in itself is a great fun ah!

So how to burn it?

Different wire because the different materials, the need to “burn” the length of time is different. General “pot” 5-6 hours began to

have significant changes, and some wire in order to get better sound, to “burn” 400-600 hours. If the car audio equipment, set aside

a long time without use, the next use also requires a period of “pot” line. As to how “pot”, the general power to take a large pot or a

long time on the audio equipment, such as playing back large frequency width of music, or if there is Beethoven s piano music

collection is very good …… and so on.

Tagged , , | Leave a comment