all speaker
other blog
Tags
2 way crossover 6x9 Speakers AC Reactor active loudspeaker Car Amplifier Car Audio car coaxial speaker car component speaker car horn car mid range car speaker component car subwoofer car tweeter car woofer ceiling speaker grills clamp ferrule concrete nails drive speaker garden speaker high power speaker horn line array horn loudspeaker horn speaker line array box line array speaker loudspeaker box marine speaker marine speakers mini loudspeaker outdoorspeaker powered speaker power pro audio pro audio pro audio speakers professional loudspeaker pro speaker Sanitary pipe fittings stainless steel elbow subwoofer box super tweeter Transformers Electric Transformers Electrical Transformer Suppliers wall mount speaker woofer speaker
Tag Archives: car tweeter
speaker not called the three solutions on their own very practical
Web Design And Seo For www.china-webdesign.com
subwoofer box – China Manufacturer
Thank you for inquiry my subwoofer box, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/key-car-subwoofer-box-30/
The car horn is the frequent use of the device while driving, if the speaker fails, the car will be very inconvenient. Sometimes according to the speakers, the sound is not like a mosquito called, is very hoarse, even voice. This is what is what causes it? Man of few words, said the cut to the chase.
(1) sometimes does not ring the car horn switch, horn and sometimes loud, sometimes does not ring, multi-speaker switch contacts within the contact, some are also speakers.
(2) hoarseness mostly due to the plug connection is bad, especially the steering wheel around each contact, due to frequent use, easy to make contact frayed.
(3) does not sound to first check the fuse to see if the fuse, and then disconnect the speaker plug with a multimeter to measure whether there is electricity here in the horn switch. If there is no electricity, should check the speaker wiring harness and horn relay
Line array speakers use techniques
Web Design And Seo For www.china-webdesign.com
pro audio – China Manufacturer
Thank you for inquiry my pro audio, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/Professional-Audio/
Line array speaker\\ s use of technology: First, what is the goal of high-quality sound system? Provide clearly defined, from seat to seat as consistent as possible frequency coverage. However, traditional methods of speaker group, the interference due to the interaction between the speakers, to achieve this goal, there are inherent limitations.
Provide better sound quality (less comb filtering), better coverage, more efficient use of amplifier power system.
The wiring of the power cord
Web Design And Seo For www.china-webdesign.com
wall mount speaker – China Manufacturer
Thank you for inquiry my wall mount speaker, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/key-wall-mount-speaker-8/
(1) the selection of the current capacity value of the power cord should be equal to or greater than the amplifier phase insurance value. If less than the standard wire power cord will produce AC noise and severe broken ring sound.
(2) when separated with a power cord to the amplifier power supply from separate points to the length and structure of the amplifier wiring should be the same. When the power cord bridge between the various amplifier potential difference, potential difference will cause the AC noise, which severely damaged the sound quality. When the host directly from the power supply will reduce noise, improve sound quality.
(3) complete removal of the dirt of the power supply (battery) connector and connector tighten. If the power connector is dirty or not tighten, joints, contact resistance. The contact resistance will lead to the AC noise, which severely damaged the sound quality. To clear the junction of the dirt with abrasive paper and fine fell.
(4) when the wiring in the vehicle power system, should be avoided alignment in the vicinity of the generator and ignition, generator noise and ignition noise radiation into the power cord. Replace the factory-installed spark plugs and spark plug cable into a high performance type, ignition spark stronger, then more susceptible to ignition noise.
(5) the principles in the car body cloth, power cord and fabric audio cable.
new cars to change audio – car should be fine to distinguish specific
Web Design And Seo For www.china-webdesign.com
car tweeter – China Manufacturer
Thank you for inquiry my car tweeter, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/super-tweeter/
Audio and video conversion professionals have pointed out, in fact, choose \"car only\" should also be careful to distinguish, in order to find the best car audio upgrade program.
Be careful, \"avoid disassembly\" fabled
To mention the end of the car, some car owners not satisfied with the original car stereo, so, wanted in the past years of the original car audio and video equipment some upgrades. In order to meet market demand, some modified shop also launched a \"free disassembly\" of the modified new program, such as disassembly to provide some free car DVD products, the conversion process for owners fear will destroy the original car design problem, achieve a \"free disassembly\" to secure modification of the effect. Sound, it seems very attractive, but demand has modified cautious owners.
All along, the car stereo, CD conversion is to \"remove modified\" approach, that is to be the basis of the original design of the car up re-wiring, design, interior changes. As car manufacturers in the production of vehicles, based on cost, fuel consumption, price, and many other considerations, combined with safe driving data such as speed, speed and other factors, so in many parts of the design layout has a fixed program, and \" demolition modified \"in the process will undoubtedly affect these original designs, often have two problems: First, the conversion process to give the\" destructive \", due to the re-design, bound to have a car the original lines, interior, cause some flawed parts; There is also modified \"adaptive\", modified car parts as reasons for change, or there may be similar to the normal operation of the power mismatches, circuit overloading and other adverse reactions, thereby affecting traffic security.
Sounds like \"free disassembly\" seems a lot of advantages, but in actual operation, but there is a big limitation, which also makes a lot of converted stores in the conversion process is still difficult to avoid disassembly. Sounds Square, audio and video conversion studio head Ningwen Jiang said that the free disassembly and installation of sound is not demolished, but in the actual conversion process, a vehicle is definitely needed to install some equipment like dismantling some of the panel, there is no full sense of the free disassembly, disassembly of degree only. Modified by individual stores for \"free disassembly\" slogan took the opportunity to put forward a higher conversion costs, vehicle owners should be careful not to be misled by their one concept, otherwise, the same conversion process is more Spent time and money.
Special car only for the host part of the
There are car owners think that the current special car modified car audio equipment, including hosts, speakers, amplifiers and other equipment fully. But in fact, the current car-specific audio-visual equipment, only for the host part of the terms. Professional car audio shop can be modified according to the needs of owners, the installation consistent with the style of the original car DVD navigation and dedicated panel, but the amplifier and the sound can only be another purchase.
Among the many suitable for conversion of DVD navigation products, as more emphasis on the design of domestic brands, especially the brand of panel models, has reached great accuracy with the original car-style effects, but unfortunately the picture, sound quality has been no implementation a breakthrough. The import of the host is still focused on the actual quality, but in terms of appearance, for most non-market selling car models are still unable to provide specific products.
Therefore, the owners are two camps in the choice of this product, from its own budget and the effect of the modification to measure, for their respective advantages and disadvantages to the appropriate purchase.
Consumer tips: professional car audio shop should choose modified
Owners of large-scale modification proposed modification to select those stores, especially those who can provide various models of car modification shop dedicated host. Currently the local car audio shop although more and more, but some only comprehensive management, audio and video is part of, usually made car brand car owners dedicated host, they can not provide cash, basically temporary transfer goods from other sources over , but also for those non-market selling cars even more powerless.
Car-specific products need to complete the variety of course, but modification process is the strength of the test conversion shop. Some of the host part of the original car modification shop removed, the replacement of the original car for a dedicated host, but the details related to the electrical installation, once the operation is unskilled, easily a security risk for the original car.
Prices, we all know, to mention a new car, if convenience stores to install directly to 4S, generally the same grade of product, more expensive than the market more than 50%. Now that a wide variety of products, the market is extremely competitive, the price of many brand-name products have been significantly reduced, the general price 3000-4000 yuan selection of products, you can reach better results.
want to buy a home theater will not be deceived – must see
Web Design And Seo For www.china-webdesign.com
car tweeter – China Manufacturer
Thank you for inquiry my car tweeter, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/super-tweeter/
At present, the home theater market starting to prove popular, how to choose, to suit your taste with a home theater has become a concern to many people. However, some traders to \"home theater\" as the words of their \"Midas touch\" spell, use it to sell counterfeit goods. Some consumers do not have the relevant knowledge, in the \"home theater\" under the gold standard, pocket buy a bunch of \"electronic garbage\", only to get some name
The \"enjoyment\" and \"fashionable\" and enjoy the only commodity on the labeling and advertising of the \"modernization\", the legitimate rights and interests have been compromised. In this \"background\", the manufacturers of seven-channel, 8-channel \"home theater processor\" is also not surprising; not to mention the \"plus horn carpenter, electrician when the total work,\" the process produced a \"family theater speaker \"of the.
In the current home theater market, not all manufacturers and traders expect the self-discipline, rational consumers in the purchase to be cautious, in particular, need to pay attention to some \"deceive\" the trick:
A: Dolby Digital, DTS readily available
If you just look at some of the media, advertising, distribution of advertising or listen to some of the manufacturers promoters, introduction to business sales, many consumers may think that a \"Dolby Digital AC-3, DTS\" and other advanced features of home theater products have been to the door, can easily have it, the price is only 1,000 yuan, or even lower.
In fact, just from the hardware is concerned, with a minimum to have \"AC-3, DTS\" functional home theater (sound general) have more than 5000 yuan. If someone thinks that only 1000 yuan will be able to solve the problem, only two possibilities: either he\\ s currency is the U.S. dollar; or he is a lie. That only the original 2-way (stereo) output power amplifier and then into a 4-way intentional (fake Pro-logic) or 5 (fake AC-3), and even more output. Put a CD or VCD (2 way surround sound) a try, and the brightest speakers in the ring. Consumers do not understand that this amp is good. Then, the business will be \"warm\" to introduce you to fish in troubled waters on the amplifier panel \"Double B\" or \"double horn\" logo (really should be \"double D\"), and show you the small print instructions on the use of vague claims There are \"AC-3\", \"DTS\" feature (this feature truly should be obvious to use the font in the main position statement: license from Dolby Laboratories).
Indeed, the real home theater amplifier to put a CD with only the left and right main channel speaker ring, center and left and right surround speakers are not sound, because the CD is only two channel stereo, not 4 or 5 independent signals. More ridiculous is that some of the \"mattress factory\" production of VCD machines are also labeled \"DTS\" logo, and DTS technology and VCD is no detached. So, truly \"AC-3, DTS\" and other advanced features of home theater, the distance from the consumer a little farther than imagined.
Two: buy the more discount the more
Such as a brand of DVD players, according to the normal retail price is 1200 yuan / Taiwan, the purchase price of 1,100 yuan / Taiwan. But if you ask the price, the price out of the business is different: 1200 yuan, 1150 yuan, 1100 yuan, 1050 yuan, 1,000 yuan have. After shop around, if you think that businesses in the asking price of 1,000 yuan to buy the most affordable home theater, you\\ re wrong.
The purpose is to open low-cost business make you think, he sold the merchandise is \"the cheapest on the market.\" When you have been fooled by his low, he will be vicious knife to kill you. When you only buy DVD players, the business will immediately say: \"Stand-alone does not sell, unless something else to buy, such as speakers, amplifiers, microphones and so on.\" To know that some of the purchase price is only 30 yuan / only the microphone, to meet the general household use, for 260-300 dollars per merchant to sell you. If you buy a pair of microphones, that $ 200 price difference is not only leveled the discs, but also may be lucrative. Moreover, many people not only buy a player and a pair of microphones, but including speakers, amplifiers, surround, etc. full \"theater.\" In addition, many consumers have found \"the more buy more discount\" and \"Law\", regardless of whether a reasonable mix of equipment, but also put together a complete home theater within the business to buy. Businesses can not see you not buy, they will ask you later on the price of equipment, throwing a high price for sale. So, some players are smart to buy a piece, which spotted the pieces which pieces to buy, so that businesses no loopholes.
Three: no-name speakers charge fine
Speaking of speakers, that\\ s what the most profitable businesses. Many businesses love business \"foreign\" brand speakers, and a considerable part are of no-name. High profit margins because of brand-name speakers. The average consumer\\ s listening level is generally not high, the lack of sound ability to identify the pros and cons. Buy speakers look pretty enough, tall enough size, speaker enough, sounded loud enough to shock, luxurious enough to put in the hall on the line.
Audition, the merchants love to use some of the disco, rock and electronic music, or use some of the so-called \"test Yindie Emperor\" Play some reason sound pressure of the aircraft taking off and landing, rocket into space, hit the glass, lightning, etc. to listen to not really sound good or bad the noise you hear, and to open a large volume, high and low tones large, such as loudness switch is pressed, then you really hear the voice strong enough enough to shock. Businesses also lost no time in your ear, said: \"Look, low-frequency strong enough to it, more metallic sound crisp treble!\" Business that the exaggeration of low turbidity strong enough to tip too harsh on the treble treble said to have to go. In fact, these are serious distortion of the noise, how can the beauty in the world? Most of these unqualified no-name speakers played \"imported\" on the cover, but in fact does not stand the scrutiny of experts. Last year, an English-speaking consumers to buy a set of \"imported\" speakers, and found that only 300 or so words of English instruction manual, there are 25 misspelled words, and apparently he bought a set of fake.
Four: foreign goods in respect of your
Currently, in cities across the country, the foreign flavor of the \"import sound\" stores have been common. Most of these stores ornate decoration, and some also have a dedicated listening room. In these stores, four posters, \"the United States, Denmark, Germany, Britain\" and \"imported\" speakers of promotional materials, and some have even posted a sharp color photo of the British royal family. Inspection certificate, undertaking, \"imported\" speakers warranty card, full of passion to communication information, etc. everywhere. There are also full of modern promoters of the lobbying, all of which will enter the consumer that the sale of the speakers here for the imported goods. In the shop, put the \"imported\" speakers gorgeous coat, value is naturally soared, the price can not be made in China to make similar comparisons. But in these stores, often embarrassing things happen, that is, when consumers are asked to the sale of \"imported\" speakers alone without customs duties and certificate of origin, the business often hesitated evasive not a direct answer. Some consumers even said: \"There is no single customs duties and certificate of origin is not important, knockoff is genuine goods.\" What is more, holding publicity to disseminate information to consumers: This is an import certificate.
In recent years, speakers and selling fake goods on the market has a new way, some of the so-called neither in domestic production sites, but no production equipment, office and only a few people, then one or more registered abroad \"foreign\" brand, commissioned a number of domestic companies to the OEM. Be pointed out that: This \"foreign\" brand did not go through the international market competition, is designed for registration and the production of the domestic market, many of them have \"cottage industries\" and \"mattress factory\" of the product, not the fundamental guarantee for the product of quality. However, these \"foreign\" brand speaker is engaged in the sale of authorized sales and store sales, so there are some deceptive.
Five: the heavier the weight the better the amplifier
In general, the greater the output power amplifier, the greater its power transformer, then the weight will also increase the cost of course, also high. Therefore, in the home theater market joke to say is: Amplifier prices to sell on the pounds. Some unscrupulous vendors will use this understanding of people deliberately engaging in sham. As in the production of PA, in the machine by adding a large lead ingots. In order to enable consumers to easily find this piece of lead ingots, and with rivets instead of screws amplifier cover riveting die, so that ordinary consumers do not split open, and thus can not be found in heaven and earth. In addition, in order to deceive consumers, but also in the instruction manual of the amplifier\\ s output power and weight machines bluff, and repeatedly \"reminded\" the consumer, do not open the lid to avoid \"dangerous.\" This manual is actually the book is a downright lie.
the selection of professional speakers and notice
Web Design And Seo For www.china-webdesign.com
powered speaker – China Manufacturer
Thank you for inquiry my powered speaker, Tel: +86.573.8468.1673, E-mail: futuresound@mailzj.cn
http://www.chinafuturesound.com/key-high-powered-speaker-1/
speaker Notes – alert – tips article: The main speaker was briefed on the selection and use of professional attention to matters of knowledge. The following order by the purchase shopping network, available to you for reference.
Selection of professional speakers and notice
Speakers to use
1. Use points
(1) a reasonable place to be two main speakers placed a certain distance to get a better stereo effect. Speaker of the base should be strong, not because of sound burst and shock. Speakers work environment to prevent hot and dry, should be placed in the ventilation. Speaker of the above items can not be placed to prevent the destruction of its resonance and sound quality. Speaker is a strong magnetic field equipment, pay attention away from the TV, watches, tape and other items.
(2) connection to short speaker and amplifier connections should try to make it short and thick, and now there are dedicated domestic anaerobic copper wire to connect speakers, to improve the sound quality does have some help, according to investment selection .
(3) loudness to the appropriate speakers can withstand the power is limited, do not let it work at full capacity, generally greater than the minimum recommended power can be. If the time limit for speakers work in power, its life will be reduced, and in severe cases can damage the speakers.
(4) cleaning and maintenance cleaning speakers use a soft damp cloth without any cleaning agent. Easy to dust off the speaker grille that can be used to clean fine brush.
2. Subwoofer crossover adjustment
Professional sound system with subwoofer to pay the entire system, bass, subwoofer location can not be aware of the listener, or subwoofer will destroy the balance of sound pressure (eg, the subwoofer placed in the left, you will feel a greater voice in front of the left channel). Can make a simple test, turn off the volume of all speakers, the subwoofer is only open; if there is no specific test audio, rich subwoofer to play music clips, in order to concentrate, can close your eyes, listen carefully to the subwoofer speaker s voice, if you can analyze it with hearing location, it means the subwoofer crossover point too high.
If you are using the standard THX speakers, can be directly transferred to 80Hz, which is the THX standard. If other \"sets\" of professional speakers, the problem is not large, set in the vicinity of 80Hz. In the left, middle and right main speakers is very good low frequency extension of the case, then lower the crossover point should be moderate. In any case, crossover, \"better not\" set at 80Hz or more, if the main speakers are \"limited bass,\" the speaker, and crossover frequency must be set above 100Hz, the location of the subwoofer should be moved to front and center, near the center channel speaker.
sound effects for the host on the evaluation of Japan is Clarion D2
Clarion Japan has been in China, Japan, the other two brands as Pioneer or Alpine in the country so famous. The reason seems to
Clarion brand manufacturers or suppliers may be more emphasis on the domestic cost of production, but do not start focusing on the
booming domestic car audio market. However, enthusiasts will certainly not forget the D2 name, because it can be said in some sense,
represents Clarion s image in the eyes of people, and its pure sound design, has also been very critical of those consumers of all ages.
All in all, I would be a Clarion fans, from the early 1990s, came into contact with its products, the beginning I always thought they do
not pay attention to after-market car audio, most of the energy on the areas with the depot facilities. Can be made to the late
1990s, the first exposure to it to sound a clear orientation DRX9255EXL host, the impression that it began to change, then the sound
quality of this host can be described as unique, special deep impression until now, but unfortunately This host is a Western version,
played it at home can be one of the few owners really! Until 2000, the Asian market s first car audio console with HDCD decoding HX
-D1, the impression it have a better understanding, because the HX-D1 sound quality than the other models is more outstanding in
the past, when the true There is a refreshing feeling. Now the market is more popular high-end Clarion another new model HX-D2,
can be said that the previous generation flagship host DRX9255EXL and HX-D1 alternative models, although it does not fashionable
MP3, WMA and HDCD playback, but the HX -D2 or the appearance of both the sound quality, are that it s in the car audio field has a
step forward.
The first design concept reflects the sound
A good equipment, starting with the design concept began, every little detail can not be ignored, it was said, every detail it
represents a sound symbol, if you want to be able to show up all the symbols, you have to pay attention to each the details.
Although the size of a standard D2 1DIN size, but, though small, can be perfectly formed. The first is the host of its copper shell, to
see that this is a boy, the industry s first 96kHz sampling digital sound processing; Burr Brown 24Bit D / A converter, 4-way electronic
crossover, 5-band parametric equalizer, 8-channel the RCA up to 4V output, digital time delay function, so that sound quality be
enhanced further, independent separate DC / DC converters to ensure stability of supply, CeNET network control, optical input /
output, vacuum fluorescent display, external simply set the amplifier output RCA low-level signals, etc., make it a lot of fans pay
homage to the products.
Copper used in the framework of D2 seems to be the host for all brands of high-end products, patents, copper shell can disrupt signals
to maximize inhibition of stray current, less susceptible to outside interference, to inhibit the effect of quality degradation, so that the
host work in a more stable state. Detail is also reflected in the output signal line, D2 line with a silver-plated SK: 6N copper output line
for RCA, 6N purity is, N is the 9 English narrow, that is, 99.9999% purity copper wire, all RCA output high-performance copper cable
used in all of this to ensure that the audio signal output to the amplifier by the smallest losses. Meanwhile, the internal circuit board
with a four-epoxy circuit board, with the power of this technology will separate the ground at different levels, to reduce the role of
impedance ground and power supply to stabilize the drive circuit, a great improvement on the quality help.
Ensure high quality sound on the details of the display also fell, D2 of the display also features auto-off feature when playing a CD or
other audio, the display circuit automatically shut down to avoid damage to the electron pulse noise, the sound quality. Independent
external power supply DC / DC converter, is this another highlight of the host, the host completely separate power supply and to
avoid interference between high voltage power supply problem, keep a good supply of pure power, so that the host job In the more
stable state, and seeks to achieve the noise completely ruled out.
Many of the world s first voice and rich details
It is worth mentioning that the application in the industry on the world s first D2 96kHz sampling digital signal processing, high-rate
sampling, the music can get more detail, just as the camera s high resolution, so that a clearer picture of the details of the outline. We
all know that regular CD sampling frequency of 44.1kHz, and the frequency of the signal D2 read his twice, that will not miss any
detail. There is a high sampling rate is high-frequency extension of the benefits will be higher, the CD s sampling frequency to 44.1kHz,
because the human ear listening range of 20kHz, so more than 20kHz UHF signal was cut off filter . However, this process will result in
clipping phase distortion, destruction of high-frequency signal fidelity; but was cut off on the high-frequency harmonic components
but also on the depth and charm to keep the sound of great significance. In order to reproduce the original audio signal the depth
and charm. HX-D2 s D / A converter sampling at 96kHz on decoding, for the first time in the car audio system to achieve a theoretical
maximum of up to 48kHz high-frequency regeneration, can be reproduced on the CD recording of various musical instruments in the
subtle charm, carefully D2 will find listening to the high frequency part of the details of the special and more.
D2 over-sampling the audio signal is encoded into a digital signal, word length is 24bit, the 16bit word length than regular CD length by
a third. Adjust the volume of high-tech technology also used crystal, the use of electronic volume IC Burr Brown United States, to
achieve a volume increase or decrease the interval to reach the world s first 0.5dB steps. By setting, users can choose 0.5dB or 1dB
accuracy. Most of the market compared to the control precision of the host, this technology has been slightly ahead.
In addition, it is 0.7 cm interval of time delay control function is considered to be of similar technology in the world s most
sophisticated, using this feature, you can for 8-channel sound system to set each speaker, no matter what the listener is located a
seat, you can achieve the best sound. 5-band parametric equalizer to the audio signal is divided into five major bands, the user can
choose according to their needs need to adjust the band, but felt it was too small number of frequency bands, can not meet the
needs of most customers, compared with Other high-end models like the Pioneer P90, Alpine H900 or 31-band equalizer trivial.
As a replacement for D1, will not let fans disappointed.
Powerful and complex, users challenge
Generally speaking, high-end positioning of the D2 is a very particular about the details of the models, especially in the area as a further
improvement of sound quality was received good results, whether it is the technology used or the actual results are favorable. On the
whole tone, in addition to the details of exaggerated feeling, which is high-quality-level system requirements, but also that its speed
too slow, and Pioneer P90 tough sense of speed compared to a completely different sense of style, is called: radish vegetables; all
have love, this is left to further business enthusiasts do.
D2 is definitely a recommended high-end host, while the use of D2 players must have extensive experience with the equipment. It is
rich with good physical function, can play through the performance of the users, showing the entire system is definitely the
opportunity for a higher level of sound performance. If those features are used to playing a simple host of players who want to take
full advantage of D2 of these complex functions, this is the greatest challenge.
How to choose the right knowledge of car audio speakers
Host, and speaker amplifier car audio system, the most important part. Host is like the human brain, what kind of sound to be issued,
may be controlled by the brain. The speaker is like the human voice, the sound is sweet, it is necessary to see how the voice. It is the
role of speaker audio signals into acoustic signals radiated to the surrounding air medium. Car speakers conical design of the most
common, which is installed in the vehicle because space is limited in the case, tapered design can be expanded as much as possible
the effective area of the diaphragm, and diaphragm determines the effective area of the low-frequency response speaker .
Accordance with zoning, the speaker can be divided into full-frequency, low frequency, medium frequency and high frequency of four
kinds. Form of energy conversion can also be divided into electrical, electromagnetic, piezoelectric, electrostatic and tablet, electric
vehicle to the main speaker. That is coaxial speakers full-range speakers, it s woofer and tweeter is designed in the same center line,
the outside is low, the inside is high, but the vocal point in the same physical location. This design can eliminate the high and low
frequency units due to the frequency range of different sounds caused by drift, but because of the high, the bass is emitted from a
point, so the larger the distortion sound. Divided into 2-way loudspeaker frequency and divide by 3, 2 divided by the tweeter and
woofer components, divide by 3 is coupled with the midrange unit. Because each unit is responsible for different frequencies, broaden
the frequency range, so as to solve the problem of sound distortion. However, because daily life, we hear the sound basically sent
from one point, while the frequency emitted by the speaker frequency of each unit, the installation of the physical location are
different. In this way, there will be voices drift phenomenon. In addition, the high, although the bass unit is responsible for different
frequencies, but it is bound to the existence of a critical point, so in a different position, given the same frequency, will produce
acoustic interference. To solve these difficulties, we must use the role of divider. Crossover As the name suggests, is to separate the
different frequencies, and sent to a different speaker unit. Of course, its function is not only this, it is also based on the characteristics
of the speaker to make proper adjustments in order to reduce distortion and interference.
Host, and speaker amplifier car audio system, the most important part. Host is like the human brain, what kind of sound to be issued,
may be controlled by the brain. The speaker is like the human voice, the sound is sweet, it is necessary to see how the voice. It is the
role of speaker audio signals into acoustic signals radiated to the surrounding air medium. Car Speakers conical design of the most
common, which is installed in the vehicle because space is limited in the case, tapered design can be expanded as much as possible
the effective area of the diaphragm, and diaphragm determines the effective area of the low-frequency response speaker . In other
words, tapered design can not install bass case, bass.
Accordance with zoning, the speaker can be divided into full-frequency, low frequency, medium frequency and high frequency of four
kinds. Form of energy conversion can also be divided into electrical, electromagnetic, piezoelectric, electrostatic and tablet, electric
vehicle to the main speaker. That is coaxial speakers full-range speakers, it s woofer and tweeter is designed in the same center line,
the outside is low, the inside is high, but the vocal point in the same physical location. This design can eliminate the high and low
frequency units due to the frequency range of different sounds caused by drift, but because of the high, the bass is emitted from a
point, so the larger the distortion sound. Divided into 2-way loudspeaker frequency and divide by 3, 2 divided by the tweeter and
woofer components, divide by 3 is coupled with the midrange unit. Because each unit is responsible for different frequencies, broaden
the frequency range, so as to solve the problem of sound distortion. However, because daily life, we hear the sound basically sent
from one point, while the frequency emitted by the speaker frequency of each unit, the installation of the physical location are
different. In this way, there will be voices drift phenomenon. In addition, the high, although the bass unit is responsible for different
frequencies, but it is bound to the existence of a critical point, so in a different position, given the same frequency, will produce
acoustic interference. To solve these difficulties, we must use the role of divider. Crossover As the name suggests, is to separate the
different frequencies, and sent to a different speaker unit. Of course, its function is not only this, it is also based on the characteristics
of the speaker to make proper adjustments in order to reduce distortion and interference.
Purchase proposal
1, the characteristics of music according to their preferences, select the speaker: If it is like to listen to the sound quality, choose
sound quality, outstanding speakers, if you like to play a large dynamic music, the appropriate choice of large diameter, heavy bass
speakers.
2, according to its own budget, choose the brand: Speaker brands currently on the market, prices are different, the brand s product
quality is good, but expensive. Specific conditions can be selected according to their own horn.
Glossary
Nominal Impedance: speaker at a particular frequency when measured at the input impedance value, it is the speaker sound system
with other parts of the important parameters match. If the data and power amplifier with a nominal impedance, there will be sound
distortion.
Sensitivity (SPL): When the speaker with 1 W power of the noise signal of 1 m in the axial direction of the sound pressure level
measured, which is reflected in the size of the speaker sound performance skills. When the optional speaker, to try to make both sides
of the consistent values (controlled within ± 1 dB), or there will be very clear sense of focus.
best-selling car audio conversion Raiders
When the car is no longer a luxury car owners in the replacement of the I, are no longer satisfied with a simple means of transport
use, more and more people have been trying to “mobile home” audio-visual experience to upgrade. Reporters recently modified in a
number of professional car audio shop found that last year topped the sales charts the first few hot models, just right of the audio
conversion, so that sort of wonderful gift to these models.
Nissan Li Wei
● [original car features]
Host using name brand CD player, resolution of a good owner to meet the general requirements in the car listening to music.
However, four 6-inch midrange speaker audio disc produced using wood pulp paper, it is generally only suitable for owners of the CD
to listen to human voices.
Not the original car loudspeakers, there is no crossover (crossover), can not reflect the level of a sense of music. Since the maximum
power of the factory speaker 40W, actually only 17W, so the volume is turned up and causing a large distortion. Moreover, the original
car no subwoofer, playing disco CD, 6-inch midrange speaker does not produce a sense of shock. In addition, it uses the paper plate
speaker sound, and very easy to cause moisture damage.
● [from experience]
Cars modified car stereo shop element responsible Huang Yan introduced, if you plan to add subwoofer, proposes to add a sufficient
luggage compartment is appropriate. Especially considering buying Li Wei to retain the original car owners think the advantages of
larger space, so choose a thin insulating bass, built-in three-way amplifier. If the budget is around $ 1000-2000, both before and after
facelift can set speaker, if purchasing more than $ 3,000 speaker packages, has been greatly improved treble sound, voice saturation
will be significantly improved.
Toyota Corolla
● [original car features]
Prior to use dual-frequency audio component speaker, not as some models two coaxial speakers mounted directly to trouble, and
adding AUX input and MP3, WMV and other mainstream media files playback, frequency of feeling is very strong, there is a kinds of
force to treble, alto, bass separate feelings. Significant loss in the high frequency band, the whole giving a soft feel, more suitable for
the general population.
● [from experience]
Open the original car radio, only the back two speakers out of the sound, the first two do not speak out. In fact, you can use the
following solutions: first, put a CD in, the volume to moderate; then, press the right button that large (on the left is the volume)
adjusted for each click on a button. It has five functions: first by the next, adjust the bass level change; by the second after the
regulation is under the treble content changes; third time after the regulation is by the sound around the speakers in the transfer;
according to the fourth after the regulation is sound under shift left and right speakers; according to the fifth after the regulation is
under the sound of low, medium and high variation.
Toyota Highlander
● [original car features]
The Highlander 3.5 Basic, for example, the original car with a CD host, the front door speakers are a pair of two-way speakers, the
back door is with a pair of coaxial speakers, can be said that a similar sound configuration, and most Toyota series car audio system of
choice similar. After all, few manufacturers are willing to in the original vehicle is equipped with high-level sound system, they pay more
attention to a balanced performance. Speaking of the original car s sound to audio enthusiasts point of view, and not too bright at all.
There reflects the owner, when the stereo sound on the 60 or so speakers will change the sound, and will hear the speaker pops
sounds like the original head power 45W, while the speaker s power is only 25W or so.
● [from experience]
After the conversion, began to feel the difference before and did not change is not large. If only for the back door of the two
speakers may start to feel after the maximum volume, there is no “pops” playing trumpet sound, and then travel for a distance, the
sound began to feel a slight improvement. Adjusted to 30 or so sounds, heavy bass can be felt, not scattered, the bass voice will
show very clearly.
Honda CR-V
● [original car features]
As a high volume of urban SUV models, CR-V in the sound, too, seems not much different from other similar models. 2010 facelift of
the CR-V2.0, equipped with multi-piece original host audio CD, CR-V2.4 is equipped with Honda accessories developed touch DVD
host, taking 6-speaker configuration. It s obvious lack of treble, weak low-frequency, intermediate frequency only slightly stronger
than the car.
● [from experience]
If the owners do not want to sound too much in the space occupied by the original car, it is recommended to install car speakers
amplifier package special-series, can be modified during the original car s damage to a minimum.
Eighth generation Honda Accord
● [original car features]
Compatible with the new Accord s audio system MP3, MWA and other formats, integrated sound good, there are also features speed
automatically adjust the volume, basically in line with user needs. But, overall, the original car sound because of cost considerations,
and have not upgraded door speakers, with plenty of room for improvement.
● [from experience]
Some owners said the Accord can not play the song, this may be due to player rate suited to play the system. You can try to use the
relevant software, will not be able to play MP3 files open, through the audio player software list, select the MP3 format conversion,
open the format dialog box, in the “Output Format” select “MP3 Encoder” and then convert sampling frequency of 44100Hz, set the
storage path, you can convert.
experts teach you five steps to buy subwoofer
Want to get a bit of your journey bass? Or move your car into a rock, right? Whether you want the final result is what, you want to
purchase these can be said to be more expensive “luxury”, the following five key points that you need to consider.
1, the budget
For most of us, this is a very important part, you can buy for your bass out of the amount to be to draw a bottom line, if not exceed
your annual income. Remember, in addition to the bass speaker, we need to go buy and bass supporting related products, such as
power amplifiers, cables, installation materials and working hours, and so on. So, throughout the purchase process, your budget must
be able to ensure that you can get a set of bass system.
Second, the size, space and number of
Size, space and number of these three projects is the scope you want to be taken into account.
Size: Generally speaking, the diaphragm has a larger cone bass at the rated power of the state, can produce more sound energy
(energy of music). This means that a big bass is equal to two or more of the bass combined. In the sense of hearing, the greater the
bass, it is more linear reduction of the low-frequency, ultra-low frequency distortion is smaller; In addition, the smaller bass, the better
the accuracy of syllables, the stronger bass music. It is also related to your listening preferences.
Space: the smaller the bass is less demand for space, whether or box volume install area. You may find that the original can only be
installed where a large volume of bass can be installed several smaller bass.
Quantity: Why can install a bass can achieve the desired effect, but also to install four bass it? The bass is now able to withstand more
than a decade ago, more power. To get a big sound pressure level of power output, more power can afford to buy a bass and amp,
in fact, you can save your budget, but also more compact cars that now make room.
Third, the impedance
Each bass has a nominal rated impedance of each amplifier has to work the required minimum stable load impedance. Impedance is the
resistance of electronic components measured in ohms. For the matching amplifier, should be more attempts, but also to be noted
that, if there are plans to upgrade later, then we should buy wisely.
Fourth, the power
Buy a bass amplifier should pay attention to consider the power, and vice versa. For example, your existing amplifier power nominal
rated power RMS500W, that your bass should correspondingly have a continuous power without distortion, or RMS500W. Do not
brands are the nominal “best” or “peak” power to choose your bass and amplifier power matching. When using multiple bass, all bass
should be rated equal to or less than the sum of your power amplifier rated identity value.
Fifth, listen to
Or modified in the audition room to listen to effects like the car, bring your favorite music to listen to the material, such as CD, MP3
and so on. But note that, in the audition room to listen, because the space is larger than the number of car may be installed in the car
with bass Xuanza not much comparable. This is because the bass frequency response of the vehicle fitted with such a small space,
because sound waves caused by the transfer function “chamber effect”, so that the bass has a significant change; of course, also
change the bass and the actual vehicle space size and location of a great relationship. After loading some bass, but also low-frequency
compression loss, because the smaller the space vehicle, for the low-frequency limit of the compression will be more obvious.
The best approach is not shy, converted to car audio shop directly to your bass into the car to feel. After all, the final results to be
reflected in the car, you should spend money on their most wanted. If the converted stores do not want to listen to repeatedly
attempt to bass, then you have to find another one converted shop.






